Author Topic: Cycle World Test IT250H  (Read 6210 times)

0 Members and 1 Guest are viewing this topic.

Offline 2fITy.J

  • Yama-God
  • ******
  • Posts: 16066
  • To get ahead, it's one down, five up!
Re: Cycle World Test IT250H
« Reply #10 on: June 06, 2015, 08:32:42 AM »
My mind is at rest now, the fuel filler cap hole IS 2.10", I guess that extra 0.10 makes all the difference 😁


Yep, sure does. Means you can decant from a standard 2" filler without creating an air lock.
A bike in the bush is worth two in the shed!

BMW-BSA-Ducati-Honda-Kawasaki-Lambretta-Matchless-Norton-Suzuki-Triumph-Vespa-Yamaha.

Dirty Dozen '13 DR650SE - '90 DR650RS - '82 IT465J - '82 IT250J - '80 GT80G - '77 A100B - '76 DT100C - '76 TC125 - '75 TM75 - '73 MX80 -       '73 TC100K - '69 TC120-1

Offline wayne61

  • Yama-God
  • ******
  • Posts: 1595
Re: Cycle World Test IT250H
« Reply #11 on: June 06, 2015, 05:00:38 PM »
I never thought of that Chris.
I was amused 'cos I've never seen that info in a bike test report before  ;D
It may become my new thing.
Power and torque are all very interesting, but what about the filler neck dia  ;D
Go soothingly on the grease mud, as there lurks the skid demon.

GRIP AND RIP CRAIG AND CHRISSO!!!