Author Topic: After market parts and parts from other models.  (Read 26989 times)

0 Members and 1 Guest are viewing this topic.


Offline PL

  • Yama-Cheese
  • Posts: 5
Re: After market parts and parts from other models.
« Reply #91 on: September 21, 2018, 03:17:32 AM »
I found some aftermarket switches on amazon that would work on the DT200 but with mixed reviews on their quality and durability.

http://www.amazon.com/Kawell-motorcycle-universal-handlebar-conversion/dp/B008G4YMHY

1990 Yamaha DT200R

Offline PL

  • Yama-Cheese
  • Posts: 5
Re: After market parts and parts from other models.
« Reply #92 on: November 27, 2018, 01:45:02 PM »
Hey folks!

I am looking for the engine oil cap stopper (bracket) that goes over the oil cap. Does anybody have one for sale or knows where to get one?

Many thanks!
1990 Yamaha DT200R

Offline Devondan

  • Yama-God
  • ******
  • Posts: 2395
Re: After market parts and parts from other models.
« Reply #93 on: November 28, 2018, 07:23:11 AM »
I?m not sure what you need, (or are describing) or where you live but the oil tank stopper and engine oil are  still available from Yamaha.
Dan
IT  400D - Trail riding
74 Montesa Cappra - Racing
YZ250 H - Racing
Norton ES2 500 trials
Norton 250 Jubilee - Road
Norton 350 Navigator (in boxes)
Norton 350 Single M50 (in boxes)

Offline PL

  • Yama-Cheese
  • Posts: 5
Re: After market parts and parts from other models.
« Reply #94 on: November 28, 2018, 02:05:00 PM »
I?m not sure what you need, (or are describing) or where you live but the oil tank stopper and engine oil are  still available from Yamaha.
Dan


Thank you for the quick reply, I will check with the dealership then! I live in USA and usually order parts from a Canadian dealership. 
1990 Yamaha DT200R

Offline Glenngt750

  • Yama-Rookie
  • **
  • Posts: 94
Re: After market parts and parts from other models.
« Reply #95 on: December 01, 2018, 09:54:47 AM »
If you go onto Yamaha.ca, their website has an online Parts Catalogue, which includes the DT200R. You can then get the part number from there. Saves a lot of wasted time trying to get a Stealership Employee to look it up.
From:Edmonton, AB. Canada. Bike(s): 1990 Yamaha DT200R, 2006 Honda GL1800A, 1977 Suzuki GT750, 1985 Honda VF750FF, 1987 Honda VFR700F2.

Offline Glenngt750

  • Yama-Rookie
  • **
  • Posts: 94
Inexpensive Braided Steel Brake Line.
« Reply #96 on: December 01, 2018, 10:18:22 AM »
I recently tried to upgrade my front brake by fitting a braided steel line. After doing some shopping both locally and online, I bought one off of Amazon.ca. I got a front brake line, in the length I needed, with the bend of banjo bolt needed, for $26.00CDN!  I thought itf it turned out to be crappy, I'd not be out much money. But, upon arrival, then installation, it turned out to be a great deal. It is SAE and DOT approved. Has a plastic tube over the steel line and two plastic "bobbins" to protect the bike. The length was correct, as well as the banjo bolt bend I asked for. It has firmed up the lever on the mighty DT200R.
   Again, for $26CDN, it is less than half price of the next cheapest alternative. ...and the quality is great.
From:Edmonton, AB. Canada. Bike(s): 1990 Yamaha DT200R, 2006 Honda GL1800A, 1977 Suzuki GT750, 1985 Honda VF750FF, 1987 Honda VFR700F2.