Author Topic: Sprocket sizes  (Read 262 times)

0 Members and 1 Guest are viewing this topic.

Offline MARK ALDRED

  • Yama-Rookie
  • **
  • Posts: 114
Sprocket sizes
« on: March 19, 2019, 07:35:28 AM »
Hi I have the YZ 465G and just wanting to know what sprocket sizes I should go for? I?m in the uk and my riding will be just on practice motocross tracks. Cheers Mark

Offline T.RexRacing

  • Yama-Hero
  • ****
  • Posts: 365
Re: Sprocket sizes
« Reply #1 on: March 20, 2019, 12:54:29 AM »
I run 14/48 2 up in the rear over stock. I found 14/46 a little too tall for me on most tracks having to bounce back and forth between 2nd/3rd too much.
Whatever you do will be insignificant, but it is very important that you do it.
- Mahatma Gandhi

Offline MARK ALDRED

  • Yama-Rookie
  • **
  • Posts: 114
Re: Sprocket sizes
« Reply #2 on: March 20, 2019, 07:17:18 AM »
Thanks  for that I appreciate it I?ll order those sizes 👍

cheers Mark

Offline SteadyT120

  • Yama-God
  • ******
  • Posts: 1468
  • YZ465 Airtime
Re: Sprocket sizes
« Reply #3 on: April 08, 2019, 07:52:30 AM »
I run 14F and 50R on my YZ465G.  Makes it much easier to ride on our short classic scrambles/MX type tracks here in NZ.  I think the 14/46 standard on the G was USA desert spec.  Interestingly the standard sprockets for the YZ465H were 14/50. (According to the JT sprockets web site anyway ...)
Cheers Steady
My Yamahas, IT250H, IT250J, IT200L, YZ465G, TT350, XS1100(& sidecar), RD400, YZ80H, YZ50, PW80, WR250FJ, TTR230