Author Topic: Yz80 H Internal rotor thread size pitch.  (Read 205 times)

0 Members and 1 Guest are viewing this topic.

Offline IT hunter

  • Yama-Rookie
  • **
  • Posts: 80
Yz80 H Internal rotor thread size pitch.
« on: January 24, 2019, 11:13:36 AM »
Anyone know the thread pitch for the internal rotor of  yz80 H so I can make a tool, ordered one but incorrect size if can get size I can make it. It seems to be around 17mm cheers.

Offline McPaavola

  • Yama-Legend
  • ***
  • Posts: 149
Re: Yz80 H Internal rotor thread size pitch.
« Reply #1 on: January 24, 2019, 05:36:31 PM »
It's M18x1,5. I made puller from lambda sensor plug.
"There are two kinds of motorcycles. Yamahas and almost Yamahas"
DT200WR '94 | YZ125K '83 | YZ125L '84 enduro | TZR250 '90 | RD125LC '86

Offline IT hunter

  • Yama-Rookie
  • **
  • Posts: 80
Re: Yz80 H Internal rotor thread size pitch.
« Reply #2 on: January 25, 2019, 08:37:59 AM »
thanks for that.

Offline IT hunter

  • Yama-Rookie
  • **
  • Posts: 80
Re: Yz80 H Internal rotor thread size pitch.
« Reply #3 on: February 20, 2019, 09:06:12 AM »
The thread from a dt200 rear axle is the right thread so a bit of cutting and welding and a new puller is made and working fine.