Author Topic: IT456 Cluch Basket Replacment Rivets  (Read 471 times)

0 Members and 1 Guest are viewing this topic.

Offline wayne61

  • Yama-God
  • ******
  • Posts: 1595
Re: IT456 Cluch Basket Replacment Rivets
« Reply #10 on: January 07, 2019, 07:33:42 PM »
I remember snap riveting a project in school metalwork class.
Had to calculate the volume of the snap head, then extrapolate that into a cylinder length to calculate the length of rivet required (grip length + enough metal to form the snap)
Curiously, in 40 years of Design Engineering I've never had to do it again!!!  ;D
Go soothingly on the grease mud, as there lurks the skid demon.

GRIP AND RIP CRAIG AND CHRISSO!!!

Offline Adam

  • Yama-God
  • ******
  • Posts: 1507
Re: IT456 Cluch Basket Replacment Rivets
« Reply #11 on: January 07, 2019, 09:25:52 PM »
Go to a place that deals with re-lining truck brakes. They use rivets to hold the lining material onto the shoes and are peined over to hold them on. I found some suitable rivets years ago when I restored my IT465.
'82 PE175Z, '93 WR500ZE, '13 KTM350EXC-F '16 Husky TE300

I don't own any DT's!

"I dogged the XR 200's for years but after riding AdamN's 84 model I was pleasantly surprised" - Brooksie

Online 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11210
Re: IT456 Cluch Basket Replacment Rivets
« Reply #12 on: January 08, 2019, 12:06:53 AM »
Go to a place that deals with re-lining truck brakes. They use rivets to hold the lining material onto the shoes and are peined over to hold them on. I found some suitable rivets years ago when I restored my IT465.

and the ones you sourced for me went into one of my baskets.

worked a treat, you'd never know the basket had been apart/built from parts

even doing it rough with a big hammer and a big drift to pien them over didn't make any difference
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline Old Shoe

  • Yama-Rookie
  • **
  • Posts: 90
Re: IT456 Cluch Basket Replacment Rivets
« Reply #13 on: January 08, 2019, 09:20:47 AM »
I remember snap riveting a project in school metalwork class.
Had to calculate the volume of the snap head, then extrapolate that into a cylinder length to calculate the length of rivet required (grip length + enough metal to form the snap)
Curiously, in 40 years of Design Engineering I've never had to do it again!!!  ;D

That?s just cus your the Boss!
Boss. :)

Offline wayne61

  • Yama-God
  • ******
  • Posts: 1595
Re: IT456 Cluch Basket Replacment Rivets
« Reply #14 on: January 11, 2019, 11:02:51 PM »
That?s just cus your the Boss!
Boss. :)

Isn't
we've told the swarfies that its their responsibility  ;D
Go soothingly on the grease mud, as there lurks the skid demon.

GRIP AND RIP CRAIG AND CHRISSO!!!