Author Topic: Will a YZ490 1982 clutch basket fit a IT465j 1982  (Read 338 times)

0 Members and 1 Guest are viewing this topic.

Offline Dean5838

  • Yama-Pupil
  • *
  • Posts: 17
Will a YZ490 1982 clutch basket fit a IT465j 1982
« on: December 19, 2018, 12:24:30 PM »
Hi All,
Need a new clutch basket for my IT465J 1982.
Will a YZ 490 1982 fit the same?

Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #1 on: December 19, 2018, 08:15:20 PM »
yes/no

no it won't go straight on. helical cut vs straight cut gears

but...

if you get the primary gear on the crank to match the basket, and you will need the later friction plates as they are different too. the centre hub and outer plate is the same though.

IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline storie585

  • Yama-Hero
  • ****
  • Posts: 402
  • 83 IT 490
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #2 on: December 19, 2018, 10:42:56 PM »
Not a hard conversion. I did it on a YZ 465.
Dave

Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #3 on: December 20, 2018, 08:49:02 AM »
yeah both my 465's are combinations of parts. straight forward if you have everything. if you find a basket for sale get the crank gear to go with it, and remember which clutch plates you need when you order new ones ;)
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline Dean5838

  • Yama-Pupil
  • *
  • Posts: 17
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #4 on: December 20, 2018, 10:32:07 AM »
Thanks all.
What if I just take the basket off the primary gear and put it on the existing primary gear I have in the IT465.
Is it then just a case of getting the right clutch plates?
I have done the same on an RD350LC before.
I am sure I could get the rivetts needed from somewhere.
The issue I have is one finger is broken on the existing basket.

Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #5 on: December 20, 2018, 05:53:32 PM »
yeah can be rivetted back together, I have one that I rebuilt from pieces for much the same reasons

I'm just not 100% certain the rivet holes are in the same spot to the later basket. that would be the only reason that would stop you.

when I did one it was an earlier basket that had the same part number cast into it, earlier 400 I think but it was an orphan basket of unknown origin. went back together with new rivets easy.
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #6 on: December 20, 2018, 05:54:55 PM »
got any pics of the RD?

 8)
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline Dean5838

  • Yama-Pupil
  • *
  • Posts: 17
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #7 on: December 21, 2018, 12:36:20 AM »
Pic of each


Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Will a YZ490 1982 clutch basket fit a IT465j 1982
« Reply #8 on: December 21, 2018, 11:23:02 PM »
superb bikes!  8)
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100