Author Topic: WR200 NZ Build  (Read 2077 times)

0 Members and 1 Guest are viewing this topic.

Offline kiwiandy

  • Yama-Legend
  • ***
  • Posts: 153
Re: WR200 NZ Build
« Reply #20 on: September 16, 2018, 06:57:32 AM »
Rolleston.   Keen for a ride at some stage.
Wow 2 WR200 owners in Canterbury! I just saw the one on TM in AKL... bit of a basket case.
http://www.trademe.co.nz/a.aspx?id=1769710561&tm=email&et=45&mt=B9AC6088-8137-464F-A3D9-2F5E0BE59368

Im ok at buying parts and bolting on, stripping a carb down and cleaning etc .. but I dont delve inside motors...
how easy were the parts to come by?
My present repetoire: YZ250A, YZ250B, TY250B, YZ125X, IT175J, DT175G, TT500E, TT500G, HL500, YZ465G, IT465H, YZ250K, YZ250N, YZ125N, 2 x IT200N, PW50, YZ250FX H,  and lots of other non YamaBikes..

Offline Spannerz

  • Yama-Pupil
  • *
  • Posts: 34
Re: WR200 NZ Build
« Reply #21 on: September 16, 2018, 03:23:32 PM »
They aren't' and they aren't cheap either.  There's another 2/3K in that bike if you want to get it back to legitimate condition.
YFS200 Blaster
WR200 Yamaha
XL200RD Honda
WR300 Husqvarna

Offline kiwiandy

  • Yama-Legend
  • ***
  • Posts: 153
Re: WR200 NZ Build
« Reply #22 on: September 16, 2018, 05:46:06 PM »
Ok cheers.. maybe I just wait until one of you guys that has done all the hard work decides to move theirs on :)
My present repetoire: YZ250A, YZ250B, TY250B, YZ125X, IT175J, DT175G, TT500E, TT500G, HL500, YZ465G, IT465H, YZ250K, YZ250N, YZ125N, 2 x IT200N, PW50, YZ250FX H,  and lots of other non YamaBikes..

Offline Spannerz

  • Yama-Pupil
  • *
  • Posts: 34
Re: WR200 NZ Build
« Reply #23 on: October 02, 2018, 02:16:02 PM »
Hi Andy.  I may have another good runner that's much more complete than the one you posted up.  Depends how keen you are.  Best for someone that appreciates it.
YFS200 Blaster
WR200 Yamaha
XL200RD Honda
WR300 Husqvarna