Author Topic: Number plate back ground kit  (Read 649 times)

0 Members and 1 Guest are viewing this topic.

Offline carnut68

  • Yama-Pupil
  • *
  • Posts: 17
Number plate back ground kit
« on: January 06, 2017, 06:52:52 PM »
Does anyone know where I can buy a yellow number plate back ground kit for a WR500


Offline sweede490

  • Yama-God
  • ******
  • Posts: 5548
Re: Number plate back ground kit
« Reply #1 on: January 06, 2017, 07:11:01 PM »

  Hey , your best bet is to make a pattern and get some decal sheet from a sign writer and whip some up

           Or you could look under YZ 250 or WR250 of the same year as they use the same side covers


Offline poppabear

  • Yama-Legend
  • ***
  • Posts: 128
Re: Number plate back ground kit
« Reply #2 on: February 16, 2017, 09:27:01 AM »

Yes, I have used "YZ Decals" before and they do OK.  The one you are looking for is about $20 US, and is 93WR250ZE-FRNTPLT-Y00902.  Check it out on their website.... or you could just make your own as suggested.  "Wicked Tough" also makes some decent repro's, and some super strong ones too.

My issue is finding the correct warning decals.  They make 2 of them (as Adams WR500 restoration, documented by Jock), but not the front fender or the KYB forks either.

Good Luck!