Author Topic: YZ 125 H  (Read 657 times)

0 Members and 1 Guest are viewing this topic.

Offline rodc

  • Yama-Pupil
  • *
  • Posts: 17
YZ 125 H
« on: May 08, 2016, 11:48:16 AM »
I pulled this one out too as it was the first one I did and needs some more love. This one has parts sourced from members, the net, ebay and gumtree and goes well. The forks are shot and it goes a little too quick when herding cattle but as they say it was the first one I did.



This one did come in boxes and crates and now just needs the platers and he spare set of forks to finish it off.



The engine needs a paint too.



And some new tyres......


Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11210
Re: YZ 125 H
« Reply #1 on: May 08, 2016, 01:26:39 PM »
superb job!!

it goes a little too quick when herding cattle

Never!! they get used to that and give up trying to outrun ya ;)
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline rodc

  • Yama-Pupil
  • *
  • Posts: 17
Re: YZ 125 H
« Reply #2 on: May 09, 2016, 09:55:59 PM »
An update for those interested in whether the steerer leaks like most H models.

Answer is Yes but only under pressure, not when just sitting. I have fitted after market seals following instructions I found at the link below. It might help some others out too.

http://forum.ozvmx.com/index.php?topic=19610.0

Cheers....


Offline Justin92

  • Yama-Legend
  • ***
  • Posts: 179
Re: YZ 125 H
« Reply #3 on: May 10, 2016, 02:35:27 AM »
You have some great bikes rodc. Loving the photos. please keep them coming!

Cheers
Justin
IT250J

Offline rodc

  • Yama-Pupil
  • *
  • Posts: 17
Re: YZ 125 H
« Reply #4 on: May 14, 2016, 09:48:03 PM »
Have enough parts for a red one too.


Offline rodc

  • Yama-Pupil
  • *
  • Posts: 17
Re: YZ 125 H
« Reply #5 on: May 15, 2016, 06:57:36 PM »
And some more shots in daylight.