Author Topic: IT200 adr compliance plates  (Read 1442 times)

0 Members and 1 Guest are viewing this topic.

Offline Itact

  • Yama-Pupil
  • *
  • Posts: 11
Re: IT200 adr compliance plates
« Reply #20 on: November 14, 2017, 10:43:43 AM »
Cool keep me posted fred

Offline Itact

  • Yama-Pupil
  • *
  • Posts: 11
Re: IT200 adr compliance plates
« Reply #21 on: November 14, 2017, 11:14:38 AM »
Confirmed from a sydney yamaha shop that my it 200 is a 2/84 .he found it on japan listing not australia.

Offline fred99999au

  • Yama-God
  • ******
  • Posts: 4133
Re: IT200 adr compliance plates
« Reply #22 on: November 14, 2017, 01:04:45 PM »
Bloke replied:

"I can do them in lots of 20 for $13.70 each." Presumably not including shipping.

Wont be stamped though, and I am still not sure that the design is correct. Not sure he understands what I am after either.

Offline Itact

  • Yama-Pupil
  • *
  • Posts: 11
Re: IT200 adr compliance plates
« Reply #23 on: November 14, 2017, 08:40:49 PM »
Ive got an it 250 k with a rough worn compliance plate so I'll  check how the stamped numbers compare when it gets here.

Offline Bigshorts

  • Yama-God
  • ******
  • Posts: 1949
Re: IT200 adr compliance plates
« Reply #24 on: March 05, 2018, 02:31:27 PM »

just thought i would show you the finished off shore replacement job, exact size, look and stamped

When someone hands you a flyer, it’s like they’re saying “Here, you throw this away.”

IT200 IT490 WR2500 IT175G x2  Ariel Red Hunter .. lots of parts unknown

Offline fred99999au

  • Yama-God
  • ******
  • Posts: 4133
Re: IT200 adr compliance plates
« Reply #25 on: March 05, 2018, 10:27:52 PM »
And in your expert opinion, was it a good job?

Bloke I found in Aus is like a dog with a bone and wants me to buy a lot. Which I dont need.

Offline Bigshorts

  • Yama-God
  • ******
  • Posts: 1949
Re: IT200 adr compliance plates
« Reply #26 on: March 06, 2018, 10:25:48 AM »

yes very well finished, came with pop rivets and more instructions than any one could possible need!! bend was easy (there was vid you could watch just in case you didn't know how to bend something! but was a mirror image of the original and it came stamped

shorts
When someone hands you a flyer, it’s like they’re saying “Here, you throw this away.”

IT200 IT490 WR2500 IT175G x2  Ariel Red Hunter .. lots of parts unknown