Author Topic: IT200 Shock Length  (Read 504 times)

0 Members and 1 Guest are viewing this topic.

Offline Adam

  • Yama-God
  • ******
  • Posts: 1506
IT200 Shock Length
« on: October 25, 2014, 07:57:50 AM »
Could one of you IT200 owners tell me what the dimension is between the top and bottom mounts? So centre to centre between the 2 bolts. I need to cut a piece of timber and drill 2 holes to replicate the shock whilst it is out.

Cheers
Ads
'82 PE175Z, '93 WR500ZE, '13 KTM350EXC-F '16 Husky TE300

I don't own any DT's!

"I dogged the XR 200's for years but after riding AdamN's 84 model I was pleasantly surprised" - Brooksie

Offline sjsingle1

  • Yama-Idol
  • *****
  • Posts: 530
Re: IT200 Shock Length
« Reply #1 on: October 25, 2014, 09:05:07 AM »
i believe it likes 16 and 3/4 inches.....from memory

Offline sluggish7

  • Yama-Idol
  • *****
  • Posts: 792
Re: IT200 Shock Length
« Reply #2 on: October 25, 2014, 12:13:44 PM »
Approx 430 mm
1x IT 400,worn out now
1x IT 200
3x IT 250 Various
1x Gas Gas 200 excellent
1x GS650 project
1x IT 125
1x It 465 working on it
1 x IT 175
And a sh_t load of bits

Offline Adam

  • Yama-God
  • ******
  • Posts: 1506
Re: IT200 Shock Length
« Reply #3 on: October 26, 2014, 08:08:26 AM »
Thanks men :)

Ads
'82 PE175Z, '93 WR500ZE, '13 KTM350EXC-F '16 Husky TE300

I don't own any DT's!

"I dogged the XR 200's for years but after riding AdamN's 84 model I was pleasantly surprised" - Brooksie