Author Topic: Just a view pic's of my sons 01 Yamaha YZ250WR  (Read 2252 times)

0 Members and 1 Guest are viewing this topic.

Offline glenn jager

  • Yama-Legend
  • ***
  • Posts: 140
  • one of my WR500's
Just a view pic's of my sons 01 Yamaha YZ250WR
« on: June 08, 2013, 07:36:34 PM »
Just thought I put up a few photo's of my Sons 01 YZ250WR
we just fitted a big boar Athena kit and V force reeds
Bike went good to start with now it goes a lot better.  






Offline enduras_wr200

  • Yama-God
  • ******
  • Posts: 1797
  • Heavy Metal is the Law!
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #1 on: June 08, 2013, 07:44:45 PM »
   Wow, she is a beauty! Your son's a lucky one! I am envious! Have fun riding off road with your son and your exceptional bikes!


   Cheers, Fanis

Offline 4V5

  • MODERATOR
  • Yama-God
  • *****
  • Posts: 11211
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #2 on: June 08, 2013, 08:01:06 PM »
very nice!! what is the differences in the power delivery of the Athena kit? should I be kicking myself I didn't do it to my YZWR when it needed a new top end?

Cheers!
Leslie
IT465x4 IT400C IT175F YZ465G YZ250C YZ250WR XJ650G RD350LC RD250LCx5 DT175Nx3 TW200x2 DT200L DT200R RT3 RX100G GT80F YZ80L PW50J KH250B1 KZ250D1 PE175C TS250ER TS185ER AG175B AG100

Offline dalesween

  • Yama-God
  • ******
  • Posts: 2010
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #3 on: June 08, 2013, 08:05:15 PM »
Nice bike!does the kit give the bike more torque.I have heard a few good reports.

cheers Dale.
Sunbury,just up the road from Mick and Rob.

Offline glenn jager

  • Yama-Legend
  • ***
  • Posts: 140
  • one of my WR500's
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #4 on: June 08, 2013, 08:14:31 PM »
Hi yep its gives it between 6 to 8 horse power and a lot more torque.. ;D :o

Offline johndimauro

  • Yama-Hero
  • ****
  • Posts: 275
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #5 on: June 08, 2013, 10:25:47 PM »
what jetting are you running with that setup? i'm thinking about sending my cylinder out to eric gorr for his 295 kit  8)
1976 Yamaha IT400C x2
1984 Yamaha IT490L x5
1999 Yamaha YZ250 (ESR325 top end/SmartCarb)
2001 Yamaha YZ250
2002 Honda CR250 (01 bottom end/99 top end/SmartCarb)
2003 Honda CR250
1988 Ski Doo Formula Plus 521

Offline glenn jager

  • Yama-Legend
  • ***
  • Posts: 140
  • one of my WR500's
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #6 on: June 09, 2013, 08:57:58 AM »
I will get back to you on the jetting with this kit you get a new head and cylinder it is a lot bigger than standard this kit is more value for money we looked into everything else the total cost was about 950 glenn

Online sweede490

  • Yama-God
  • ******
  • Posts: 5548
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #7 on: June 09, 2013, 10:33:28 AM »
bl__dy nice looking bike Glenn ... a great option to give the berg-ktm 300,s a good run too at 1/3 cost  ;D



   Muzz

Offline Yamahopper

  • Yama-Pupil
  • *
  • Posts: 21
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #8 on: June 09, 2013, 10:55:22 AM »
Really nice bike. Your son takes wonderful care of his YZ. ;)

Offline glenn jager

  • Yama-Legend
  • ***
  • Posts: 140
  • one of my WR500's
Re: Just a view pic's of my sons 01 Yamaha YZ250WR
« Reply #9 on: June 09, 2013, 06:42:17 PM »
hi jetting for this bike is main 175 pilot 50 needle second clip from top air screw 1.5 out glenn