Author Topic: YZ80H project  (Read 13106 times)

0 Members and 1 Guest are viewing this topic.

Offline dalesween

  • Yama-God
  • ******
  • Posts: 2010
Re: YZ80H project
« Reply #50 on: August 16, 2011, 05:28:19 PM »
A few parts are starting to turn up,i can get on with it soon :)


cheers Dale.
Sunbury,just up the road from Mick and Rob.

Offline killindini1

  • Yama-God
  • ******
  • Posts: 2977
  • IT200L IT200S SDR200 WR250Z 1992
Re: YZ80H project
« Reply #51 on: August 16, 2011, 06:05:09 PM »
Ummmmm genuine parts ;D ;
Ummmmm run out of money ;D ;D ;D
Eye candy.
Beer is more than just a breakfast drink

Offline Todd W.

  • Yama-Rookie
  • **
  • Posts: 67
Re: YZ80H project
« Reply #52 on: August 17, 2011, 12:44:33 AM »
We're so lucky that Yamaha likes to do "parts bin engineering" so they used the same parts for so many other bikes and years.  Lots still available from the supplier still!  New labels among some NOS labels.  Looks like you've been doing your homework!  That's definitely eye candy, yummmm! ;D ;D

Offline Todd W.

  • Yama-Rookie
  • **
  • Posts: 67
Re: YZ80H project
« Reply #53 on: August 18, 2011, 04:05:41 AM »
Have you looked at Speed and Sport yet?  They're in Pennsylvania USA.  They've got tons of NOS stuff, but also do reproduction graphics.  Just in case you were looking....

Offline dalesween

  • Yama-God
  • ******
  • Posts: 2010
Re: YZ80H project
« Reply #54 on: August 18, 2011, 04:56:32 PM »
Has anyone used these type of unifilter? i guess you do away with the filtercage and tighten the clamp onto the airbox ???

cheers Dale.
Sunbury,just up the road from Mick and Rob.

Offline S.O.C

  • Member
  • Yama-Hero
  • *
  • Posts: 274
  • poppy
Re: YZ80H project
« Reply #55 on: August 18, 2011, 08:18:31 PM »

     I have used Uni air filters Dale there o k your probable like me and

     clean and oil the filter after every ride any how..

     Poppy..

Offline Todd W.

  • Yama-Rookie
  • **
  • Posts: 67
Re: YZ80H project
« Reply #56 on: August 18, 2011, 11:17:27 PM »
I haven't used that style although I do like UNI filters in general.  Yamaha should still offer OEM filter for that bike.  It's hard to see what you mean by discarding the filter cage, but the cage is usually there to prevent the filter from collapsing and getting sucked flat. 

Offline dalesween

  • Yama-God
  • ******
  • Posts: 2010
Re: YZ80H project
« Reply #57 on: August 19, 2011, 04:39:06 PM »
Yeah, this one has a big coiled piece of wire inside to stop it collapsing,yes Pop after every ride,i actually leave mine until the day before my next ride because my rides are a long time apart, i have a spare clean one i oil and put in the day before.If i do it when i wash the bike strait after a ride then the bike sits for a couple of months all the oil drains to the bottom of the filter and you have to take it out and reoil it anyway.

cheers Dale.
Sunbury,just up the road from Mick and Rob.

Offline dalesween

  • Yama-God
  • ******
  • Posts: 2010
Re: YZ80H project
« Reply #58 on: September 17, 2011, 01:48:36 PM »
A little bit more progress.








cheers Dale
Sunbury,just up the road from Mick and Rob.

Offline Todd W.

  • Yama-Rookie
  • **
  • Posts: 67
Re: YZ80H project
« Reply #59 on: September 18, 2011, 08:04:00 AM »
Looking good so far.  Damn, You're making me want to get out to the shop and start working again!  Where did you get the Swingarm Bushings?  I'm was planning on machining some for my 60 out of nylon.  Are they available from Yamaha still?